JVC D-ILA DLA-X95R Manual Del Usuario página 59

Whole Adjust (Fine) Operation Procedure D C B
For making general adjustments on the misalignment of the entire screen using "Adjust(Pixel)", followed by making fine
adjustments.
A Set "Adjust Area" to "Whole"
B Select "Adjust Color" and "Adjust Pattern Color"
C Select Adjust(Fine), and press the [OK] button
The selected adjustment pattern and Fine window are displayed.
0
The adjustable range may be smaller depending on the pixels being adjusted on the entire screen.
0
.
D Press the [OK] button to enter the Adjustment mode
E Use the [JKH I] keys to move and adjust the pixels in the vertical and horizontal directions across the entire screen.
The adjustment setting appears at the center of the Fine window.
0
Pixel Adjustment Setting
Adjustment Setting
.
F After adjustment is complete, press the [BACK] button to exit the Adjustment mode
MEMO
If both the maximum overall screen misalignment of H (horizontal direction) and V (vertical direction) are "31", you
0
cannot select a value that is larger than the displayed setting even when the adjustment setting is lower than the
maximum value.
If the minimum overall screen misalignment is "-31", you cannot select a value that is smaller than the displayed
0
setting even when the adjustment setting is higher than the minimum value.
Fine Window
Pixel Adjust
Whole Adjust (Fine)
H 0 ( 0 / 0 )
V 0 ( 0 / 0 )
Color A. ADJUST. Color P.
COLOR. COLOR.
GAMMA
TEMP P. FILE.
Whole Adjust (Fine)
H 0 ( 0 / 0 )
V 0 ( 0 / 0 )
Color A. ADJUST. Color P.
COLOR. COLOR.
GAMMA
TEMP P. FILE.
H −20 （−20 / −20）
V
Red
Select
Back
A. Area
PIC. Operate
BACK
ADJ.
H (Horizontal)
Pixel Adjust
Red
Select
Back
A. Area
Operate
PIC.
ADJ.
5 （ 5 / 5）
Adjustment Pattern
Color for
Adjustment
Remote Control Operation
BACK
Guide
Indicates the maximum and
minimum misalignment value of
the entire screen.(Max. / Min.)
59