Lenze L-force 9400 Instrucciones Para El Montaje página 63

Assignment of installation backplane ˘ standard device
Axis controller
type
E94xSxE0024
E94xSxE0034
E94xSxE0044
E94xSxE0074
E94xSxE0134
E94xSxE0174
E94xSxE0244
1)
The busbar mounting set with fuse is available as an accessory. It is required when Single Drives are operated in
DC−bus connection via the DC busbar.
Motor cable length
Maximum motor and feedback cable lengths
(for shielded motor cable with rated mains voltage)
If EMC conditions must be met, the permissible cable lengths can be reduced.
Type
E94xSxE0024
E94xSxE0034
E94xSxE0044
E94xSxE0074
E94xSxE0134
E94xSxE0174
E94xSxE0244
Type
E94xSxE0024
E94xSxE0034
E94xSxE0044
E94xSxE0074
E94xSxE0134
E94xSxE0174
E94xSxE0244
EMC limit value class for conducted noise emission in TN/TT systems:
C2 to EN 61800−3 corresponds to class A to EN 55011
C1 to EN 61800−3 corresponds to class B to EN 55011
1)
Universal−current−sensitive earth−leakage circuit breaker 30 mA
If several devices or cable lengths > 50 m are used, it is possible that the circuit breaker will respond, depending on
the type of cable and the switching frequency.
2)
Universal−current−sensitive earth−leakage circuit breaker 300 mA
If several devices or cable lengths > 50 m are used, it is possible that the circuit breaker will respond, depending on
the type of cable and the switching frequency.
Universal−current−sensitive earth−leakage circuit breaker, cable length £ 25 m: 30 mA, cable length > 25 m: 300 mA,
3)
If several devices or cable lengths > 50 m are used, it is possible that the circuit breaker will respond, depending on
the type of cable and the switching frequency.
4)
See hardware manual, "Fuses and cable cross−sections" chapter.
EDK94ASH24 DE/EN/FR/ES/IT 8.0
General data and operating conditions
Installation Busbar mounting set / fuse
backplane type
E94AZPS0034 E94AZJA003/ EFSAR0016ARHN
E94AZPS0074 E94AZJA007/ EFSAR0040ARHN
E94AZJA024/ EFSAR0100ARHN
E94AZPS0244
(tightening torque: 3.4 Nm
Device size
1
2
3
Max. shielded motor cable lengths for compliance with the
conducted interference emission according to C1/C2
with RFI filter
1)
E94AZRS0044
−/50 m
1)
E94AZRS0104
−/50 m
1)
E94AZRS0294
−/50 m
l
Technical data
1)
(30 lb−in))
[m]
50
100
100
with mains filter
3)
E94AZMS0034
25 m/50 m
3)
E94AZMS0094
25 m/100 m
3)
E94AZMS0184
25 m/100 m
3)
E94AZMS0314
25 m/100 m
4
Device size
I
II
III
without filter
4)
−/10 m
4)
−/10 m
4)
−/10 m
4)
−/10 m
63