Auto Synchronization; Basic Operation; Teletext - JVC LT-19HA22U Manual De Instrucciones

Auto Synchronization

This feature can display the time based on the
DVB signal information.
If you wish to set the time manually, select
"Off" as follows and then perform the Date and
Time options.
1
Select /Time Setup/Time/Auto
Synchronization.
2
Then press or
3
Press to select Date, then enter the date
with 0-9 buttons.
4
Then press . Enter the Time same as above.
5
Press MENU to exit the menu.

Basic Operation

Channel selection
With the numbered buttons.
Example:
• No. 2: Press 0 and within 2 seconds, press 2.
• No. 29: Press 2 and within 2 seconds, press 9.
• No. 929: Press 9, 2, 9 same as above.
Press P + or – to change up or down a channel. This
takes approx. 2 seconds. If the auto search only stored
5 stations, only these 5 will appear. Skipped channels
will not appear (see P.12).
Channel List
The Channel List shows a list of all receivable
programmes.
Press CH LIST to display the Channel List.
Press or to select the desired channel.
Press CH LIST to display the selected channel.
• If you press CH LIST again, the Channel Details will
appear.
Information display
Press . The program information will appear for
approx. 4 seconds.
The following figure is an example of DVB-channel
reception.
3 5
1 2 4 6
ARTE
16
3_ARTE_Monosco_0820_0000_0030_ABCDEFGHI
15
2:00 - 2:30
14
Age : 4
TTX STTL
13
2:30 - 3:30
3_ARTE_Monosco_0820_0000_0030_Audio6_ABCDEFGHIJKLMNOPQRSTUVWXYZab
cdefghijklmnopqrstuvwxyz_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs 1/2
tuvwxyz_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_ABCDEFG
1. Channel Name
2. Lock status
3. Visual Impaired Audio
4. DVB Teletext available
5. DVB Subtitle available
6. Subtitle Language
7. Audio Language
8. Audio Format
to select Off.
8
7 9 10
1
12
9. Video Format
10. Channel Number
11. There are more than 2 pages.
12. Program Detail
13. Next Program Duration
14. Parental Rating
15. Program Duration
16. Program Title
Note:
• If the current watching DVB-channel has more
than one audio language or subtitle language,
you can change them by each pressing of
AUDIO I/II or
• Some DVB-broadcasts may not provide subtitle
language service.
QuickView
button allows you to go back to the last selected
TV channel.
• Even in external input mode, it will go back to the
last selected TV channel.
MUTING
Press . The sound will be cut off.
The muting can be released by pressing
+ or –.
Still picture
Press FREEZE to make a still picture. To cancel the
still picture, press FREEZE again.
Note:
• The still picture function is available only for ATV/DTV-
input mode.
• During still picture mode, PICTURE SIZE feature is not
available. (still picture mode will be canceled)
Note:
• If the built-in tuner does not receive anything (e.g. if no
antenna is connected) during TV-operation, then the TV-
unit will change to standby after approx. 15 minutes.

Teletext

Teletext is sent page by page. This unit is able to
automatically store up to 1000 pages, but they can
only be accessed once they have been stored. This
can take a few moments.
The TELETEXT menu allows the installation of
the teletext language.
The languages displayed are only those
supported by the channel. In Germany this is
usually GERMAN.
Fastext/TOPtext
The Fastext/TOPtext is teletext with a special
directory.
On the lower part of the screen there are four
different coloured fields (red, green, yellow and
blue). These fields lead directly to the pages
shown within. The coloured buttons on the remote
control correspond to the coloured fields. Press the
appropriate coloured button in order to activate the
desired colour field.
11
.
again or
13