Stopping The Engine; Starting The Engine - Mosa GE 6000 SX/GS Manual Del Usuario

© MOSA REV.1-09/06
Check daily
NOTE
Do not alter the primary conditions of regulation
and do not touch the sealed parts.

STARTING THE ENGINE

lnsert the electric protection device (D) lever
towards above, see page M37 –
OFF
ON
Introduce the key (Q1), turn it
START
clockwise completely, leaving it as
soon as the engine starts.
Let the engine run for some minutes before drawing
the load.
ENGINE STARTING - STOPPING THE ENGINE

STOPPING THE ENGINE

☞
Before stopping the engine it is compulsory to
effect the following operations:
- stop to draw three/single-phase current from the
auxiliary sockets.
Make sure that the unit is not supplying any power.
Disconnect the electrical protection device (D) lever
downward.
OFF
ON
Stop the engine turning the key (Q1) it
START
counter clockwise, OFF position, then
take it out.
☞
NB.: for safety reason the key must be kept
by qualified personel.
CAUTION
If the engine fails to start, do not insist for at least
15 seconds.
Space the further operations waiting for at least
4 minutes.
CAUTION
RUNNING-IN
During the first 50 hours of operation, do not use
more than 60% of the maximum output power of
the unit and check the oil level frequently, in any
case please stick to the rules given in the engine
use manual.
GE 6000 SX/GS
GE 6500 SX/GS
M
21