Fora D10 Manual Del Usario página 49

• Do NOT clean and disinfect the meter while performing tests.
• Please follow the instructions on the package label of Micro-Kill+™ disin
fecting wipe.
• If the meter is being operated by a second person, the meter and lancing
device should be decontaminated prior to use by the second person.
• Do NOT allow cleaning and disinfecting solution to get in the test slot,
battery compartment, or strip-ejection button.
• If you do get moisture in the test strip slot, wipe it away with a corner of
tissue.
• Always dry the meter thoroughly before using it.
• Do NOT spray the meter directly with cleaning solutions especially those
containing water (i.e. soapy water), as this could cause the solution to
enter the case inside and damage the electronic components or circuitry.
NOTE
49