Shark Vision-R Manual De Instrucciones página 15

juGulaire • chin Strap • Kinnriemen • cinturino • cincha
Boucle "Precise lock" • "Precise lock" Buckle • Verschluss „Precise
lock" • FiBBia "Precise lock" • cierre "Precise lock"
holdinG SyStem
Depending on the various versions and the country
concerned, your Vision-R SHARK helmet is equipped
with a chin strap with a "Precise Lock" rapid buckle
with a snap lock or one with a double D ring.
The "Precise Lock" snap lock system gives you precise
and accurate adjustment because of the considerable
length of its notched section.
However, it is essential on purchase to adapt the length
of the chin strap to your measurements. Adjust the
length of the strap using the adjusting buckle (Figs. A,
D
B, C and D). Choose your Vision-R helmet and attach
the holding system. When the "Precise Lock" is ad-
justed to the medium position, the chin strap must be
correctly tensioned under the chin to hold the helmet
firmly without causing you any discomfort or pain.
To fasten the chin strap, all you have to do is to thread
the tongue into its place on the buckle until tension is
perfect (Fig. E). The tongue connects and is automati-
cally blocked.
To release the chin strap, you have to pull on the
lever (Fig. F) and remove the tongue from the buckle.
Although the notched tongue enables you to change
the adjustment precisely on each use, it is important
to check frequently that the adjustment of the strap
E
length is correct.
Warning: never ride with the chin strap loose or insuf-
ficiently tightened. Even though the interior padding
gives you the impression of being held, your helmet
risks coming off in a fall.
Never apply lubricating or acid products or grease or
solvents to the chin strap buckle parts.
F
15
uel VISION-R-VisionGT-V02.indd 15 01/10/12 18