Seat; Wheels; Registrations; Registering The Clutch Cable - GOLDONI EURO Serie Manejo Y Cuidado

5.6 SEAT

If necessary adjust seat distance from steering wheel (with lever n.11 fig.1). Use
knob n.1 fig.6, to adjust seat firmness.

5.7 WHEELS

Tyre
7.50 - 16
8.25 - 16
11.5/80 - 15.3
7.50 - 20
7.50 - 16XS
7.50 - 18
260/80 - R20
9.5 - R20
250/80 - R18
9.00 - R16XS
29x12.50-15

5.8 REGISTRATIONS

5.8.1 Registering the clutch cable.

When the pedal free travel is less than 10 mm, register it with adjuster n.1 fig.13.
You can also change the position of the cable fixing hole at the end of the clutch
housing.

5.8.2 Registering the parking brake cable

If braking park travel is not enough to brake the tractor, turn the adjusting screw
to the left or the right, n.2 fig.13, to increase cable tensioning.

5.8.3 Registering the mud scraper blade

The tractor has a mud scraper blade that can be adjusted for the type of wheel
gauge selected.
In the front (n.2 fig.8), registration is done by moving the blades in their fixing
slots.
At the rear (n.3 fig.6), the blades can be positioned as shown in fig.15.
Important: Minimum distance between blade and tyre must not be less than
5mm.
TYRE INFLATION PRESSURES
Front
Bar
1,8
1,8
1,8
1,8
1,8
2,8
1,8
1,8
2,7
1,8
1,4
49
KPa Bar
180 1,6
180 1,6
180 1,6
180 1,6
180 1,6
280 2,6
180 1,6
180 1,5
270 2,5
180 1,6
140 1,4
Rear
KPa
160
160
160
160
160
260
160
150
250
160
140