gala gar Smart Tig 310 PACDC Manual Técnico De Instrucciones página 51

Outer timing operation mode:
④ Push the torch trigger: arc is ignited and current
⑤ If release it within 1s, it will turn to ③; if release it
rises gradually.
after 1s, arc will stop.
⑥ Push it again: current drops gradually, and arc
stops.
Cycle double operation mode without initial current:
⑤ Push the torch trigger: arc is ignited and current
rises gradually. The torch trigger can be released at
any time.
⑥ Push the torch trigger and release it at once: current
drops to pilot arc current value.
gradually rises again, and then turn to ②.
⑦ Push the torch trigger and release it at once: current
⑧ If push the torch trigger twice within 0.5s, the
current will drop gradually, and arc will stop.
Cycle double operation mode with initial current:
⑤ Push the torch trigger: arc is ignited and current
reaches the initial value. The torch trigger can be
released at any time.
⑥ Push the torch trigger and release it at once: current
gradually rises.
drops to pilot arc current value, and then turn to ②.
⑦ Push the torch trigger and release it at once: current
⑧ If push the torch trigger twice within 0.5s, the
current will drop gradually, and arc will stop.
Single operation 3T mode:
④ Push the torch trigger: arc is ignited and current
rises gradually.
⑤ Release it: current drops to pilot arc current value.
⑥ Push it again: arc stops.
Double operation 3T mode:
④ Push the torch trigger: arc is ignited and current
rises gradually. The torch trigger can be released at
any time.
⑤ Push the torch trigger and release it at once: current
drops to pilot arc current value.
⑥ Push it again: arc stops.
Smart Tig 310 P ACDC
1s
Pág. 51