Cobra MicroTalk PR4000WX Manual Del Propietário página 10

Using Your Radio
Operation
To Recall a Stored Memory Channel Location:
Mode Button
1. Press the Mode button until the Memory icon
and the memory channel location (1 through
10) flashes on the display.
2. Press the Channel Up or Channel Down button
Memory Icon
to select a memory channel location.
3. a. Press the Talk button to transmit on the
selected memory channel and return to
Standy Mode on that memory channel.
Channel Button
b. Press the Mode button to exit the Memory
Mode without changing the memory channel
setting and proceed to other functions.
Scan
Your microTALK
main channels (1 through 22) or the privacy
codes (00 through 38) within one (1) main
channel, or memory locations.
To Scan Main Channels:
Mode Button
1. Press the Mode button until the Scan icon and
the main channel number flashes on the display.
2. Press the Channel Up or Channel Down button
to begin scanning the main channels.
Scanning Channels
The radio ignores privacy codes
while scanning main channels.
3. The Scan icon will continue to be displayed
Channel Button
when scan is On. Your radio will continue to
scan all main channels and stop if an incoming
transmission is detected. Your radio will
remain on that channel for ten (10) seconds.
During this time, you can:
a. Press and hold the Talk button to communicate
with others. Your radio will remain on that
channel and return to Standby Mode.
b. Press the Channel Up or Channel Down
button to resume scanning channels.
c. Press the Mode button to proceed to privacy
code scanning (see page 17 for further details).
16 English
® radio can automatically scan
Introduction
Channel Button
Select Channel
•
Mode Button
Scan Privacy Codes
Operation Customer Assistance
If you press the Talk button while scanning
and not within ten (10) seconds of receiving
transmission, you will transmit on the last
channel you transmitted or received on.
If you do not press any button within ten
(10) seconds, your radio will automatically
resume scanning main channels.
To Scan Privacy Codes:
1. While in Standby Mode, press the Channel Up
or Channel Down button to choose the main
channel you wish to scan.
2. Press the Mode button until the Scan icon and
the privacy code number flashes on the display.
3. Press the Channel Up or Channel Down button
and your radio will begin scanning privacy
codes within the main channel you selected.
4. The Scan icon will continue to be displayed
when scan is On. Your radio will continue to
scan privacy codes and stop as incoming
transmission is detected. Your radio will
remain on that channel and privacy code for
ten (10) seconds. During this time, you can:
a. Press and hold the Talk button to
communicate with others. Your radio will
remain on that channel and privacy code
and return to Standby Mode.
b. Press the Channel Up or Channel Down
button to resume scanning privacy codes.
c. Press the Mode button to proceed to memory
scanning (see page 18 for further details).
If you press the Talk button while scanning
(see page 16 for further details) and not within
ten (10) seconds of receiving transmission,
you will transmit on the last channel you
transmitted or received on.
If you do not press any button within ten
(10) seconds, your radio will automatically
resume scanning privacy codes.
Nothing comes close to a Cobra
Warranty
™ 17