Cobra MicroTalk PR4000WX Manual Del Propietário página 8

Using Your Radio
Operation
To reset the display to "OO:oo:oo," press the
Lock Button
Lock button.
While in Stopwatch Mode, your microTALK
radio will alert you to incoming calls, but the
LCD will continue to show the stopwatch display.
You can also transmit as normal with the Talk
button or in VOX Mode. When you do, the LCD
will automatically return to normal display.
Once you have finished transmitting, the radio
will automatically return to Stopwatch Mode.
The Compass operation cannot be
used while in Stopwatch Mode.
Clock
Mode Button
Your microTALK
time and appropriate AM/PM indication.
To Activate Clock Mode:
1. Press the Mode button until the clock is displayed.
Clock Mode
2. Press the Mode button to exit Clock Mode
and proceed to other functions.
To Set the Clock:
1. While in Clock Mode, press the Lock button.
Lock Button
The hour will flash on the display.
2. Press the Channel Up or Channel Down
button to set the hour.
3. Repeat steps 1 and 2 to set minutes
Set Clock
and AM/PM.
4. Press the Mode button to exit the Set Clock
feature and proceed to other functions.
While in Clock Mode, your microTALK
alert you to incoming calls, but the LCD will continue
to show the Clock display. You can also transmit
as normal with the Talk button or in VOX Mode.
When you do, the LCD will automatically return to
normal display. Once you have finished transmitting,
the radio will automatically return to Clock Mode.
The Compass operation cannot be
used while in Clock Mode.
12 English
®
® radio displays the current
® radio will
Introduction
Mode Button
Alarm Icon
Mode Button
•
Alarm Icon
Lock Button
Alarm Set Hour
Channel Button
Operation Customer Assistance
Alarm
You can use the time keeping feature of your
microTALK ® radio as an alarm.
To Activate Your microTALK ® Radio Alarm:
1. Press the Mode button until the Alarm
icon flashes and the current On or Off
setting is displayed.
2. Press the Channel Up or Channel Down
button to turn the alarm On or Off.
To Set the Alarm:
1. Press the Mode button until the Alarm
icon flashes and the current On or Off
setting is displayed.
2. Press the Lock button. The hour will flash.
3. Press the Channel Up or Channel Down
button to set the hour.
4. Repeat steps 2 and 3 to set minutes
and AM/PM.
5. a. After setting AM/PM, press the Lock
button to enter the Alarm time, turn Alarm
setting On and to return to Standby Mode.
b. Press the Mode button to enter the
Alarm time, turn Alarm setting On
and proceed to other functions.
c. Press the Talk button to enter the Alarm
time, turn Alarm setting On and return
to Standby Mode.
Nothing comes close to a Cobra
Warranty
•
™ 13