Powering The Sprintpack Li-Ion Power System - Vyaire SprintPack Manual Del Usuario

Powering the SprintPack
Connect an approved power source to the Power Input connector on the
Power Manager.
Table 4.1 SprintPack Approved Power Sources
AC Power Adapter
External Battery Kit, 9 hours
External Battery Kit, 3 hours
Universal Power Supply (UPS)
Automotive Lighter Power Cord
External Battery DC Cord Set
When an approved power source is connected, the SprintPack Batteries will
begin to charge (unless 100% charged).
NOTE
Charging time -
depending on the power capability of the approved input power source used.
Utilize the LTV AC power adapter for best charge time results.
WARNING
LTV Ventilator power input - The LTV Ventilator accepts approved power
sources with a voltage rating of 11 – 15 Volts DC (VDC). Do not apply more
than 15 VDC to an LTV Ventilator as damage to internal
components may occur.
Connected to a DC power source with 11 – 29 Volts DC (VDC).
2
4-2
Description
The charging time for the SprintPack Batteries varies
Operator's Manual – SprintPack
Li-Ion Power System
™
Part Number
14546-001
2
2
11448
10800
10900
11544
10802
™
32328-001 Version A