Start-Up; Turning The Device On - Astralpool Waterlift Manual De Instrucciones

Start-up

7 Start-up

7.1 Turning the device on

DANGER OF ELECTROCUTION
Pay special attention to the proper connection of the equipotential power point to the device
power point (Refer to Fig. 13).
Never connect the mains supply to the swimming pool structure or equipotential power point.
CAUTION
Before turning the device on, release the fastening flange (fastened to one of the lift guides to
prevent unwanted movement during transport) to lock the Waterlift moving step.
CAUTION
When the lift is operated for the first time, nobody should stand on the moving step, nor should any
weight be put on it until it has reached its top position.
Fig. 13: Connecting the unit to the equipotential power point.
To turn it on:
After connecting the unit to the 24 V power supply cabinet, and the latter to the 230 V current line,
unlock the power supply cabinet using the switch (main switch) on its side.
Fig. 14: Main switch off position.
18/196
0
1
0
1
Fig. 15: Main switch on position.
Instructions Manual Waterlift rev.0.7 -06/09