Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
Product Description
INTRODUCTION
Product Description
This submersible pump is for use in basins or lift stations and is suitable for pumping clear water or effluent
gray water with up to 1/2" spherica
debris (gravel, sand, floating
This product has been carefully tested, inspected, and packaged to ensure safe delivery and operation.
Please examine your item(s) carefully to ensure that no damage occurred during shipment. If damage has
occurred, please contact the place of purchase. They will assist you in replacement or repair, if required.
The pump motor is equipped with an automatic resetting thermal protector and may restart unexpectedly.
Protector tripping is an indication of motor overloading/overheating, which can be caused by application
issues such as an obstructed pump impeller, switch stuck in the ON position, pump running dry, pump air-
locked, pump short cycling, excessively high or low voltage supply, or possibly a pump, motor, bearings or
seal that have reached the end of their useful life.
Specifications
Height
6EC
10EC
4
l semi-solids. Do not use the pump in applications where sewage or any other
debris, etc.), abrasives, or corrosives are present.
Gallons/Liters per Minute, at Height
5 ft
10 ft
1.5 m
3 m
53 GPM
50 GPM
201 LPM
189 LPM
67 GPM
57 GPM
254 LPM
216 LPM
15 ft
20 ft
4.5 m
6.1 m
42 GPM
34 GPM
159 LPM
129 LPM
47 GPM
42
178 LPM
159 LPM
30 ft
Shut Off
9.1 m
28 feet
–
8.5 meters
24 GPM
36 feet
11 meters
91 LPM
Publicidad
Tabla de contenido
