Usb­mode - Grundig WTR 3200 BT DAB+ WEB Manual Del Usuario

USB­MODE
Playing­the­contents­of­a­USB­
memory­stick
1
Switch off the device from standby mode
by pressing » 8 « on the remote control or
» 8 « on the device.
2 Connect the USB interface of the MP3 player
to the »USB« socket on the device (on the back
side), using a standard USB cable;
or
insert the USB plug of the USB memory stick
in the »USB« socket (on the back side) on the
device.
3
Switch on the device from standby mode
8
by pressing » « on the remote control or
8
» « on the device.
4
To enter Music player mode, either press
»Menu« button --> select "Main menu" --> Mu-
sic player or press »Mode/AL« button then
turn the Volume knob clockwise or anticlock-
wise to scroll left or right through the mode
list until Music player is highlighted and press
»OK«.
– Display: »Music player« submenu opens.
5
Select the option »USB playback« by pressing
» « or » « or by turning the Volume Knob
and confirm by pressing »OK«.
– The content of the USB appears in the dis-
play.
Note:
If no USB memory stick has been inserted,
7
»No USB device found« appears in the dis-
play after a short time. Insert the USB by re-
ferring to the "Connecting an MP3 player or
a USB memory stick" section.
6 Select the file or track by pressing » « or » «
or by turning the Volume Knob.
7 Press »OK« to start playback.
– Display: Playback starts, elapsed playing
time, total playing time and file information
appears in the display.
8 Press » e II« on the remote control to play or
pause the playback.
­ - ---------------------------------------------------------------------------------------------------------------------------------
ENGLISH
19­ ­