Olivetti ECR 5500 Guía De Referencia Rápida página 8

13. DEFINE A CLERK NAME
You can program a clerk name or identifier of up to 12 characters long by using the Character Code Table provided
in the Appendix of the Instructions Manual.
1. Open the printer compartment cover and slide the control switch to the PRG position.
2. Switch the cash register to the Clerk name definition mode by pressing the [#/NS] key repeatedly until displaying
the message "C01" indicating the first Clerk number.
3. Select the Clerk number corresponding to the Clerk whose name you wish to define by pressing the
[Department 1/9] key repeatedly until displaying the number on the right hand side of the operator display. You
can also use the [Department 5/13] key to scroll backwards through the Clerk numbers.
4. With reference to the Character Code Table provided in the Appendix of the Instructions Manual, type the string
of character codes to define the letters of a name and then press the [Check] key. The name entered will be
automatically printed.
5. Exit from this programming sequence by pressing the [Amt Tend/TOTAL] key.
6. Program another feature or exit the program mode by sliding the control switch to the OFF position.
Example: Program Christina as the name for Clerk number 2.
Type/Press:
[#/NS] + [#/NS] + [#/NS] + [Department 1/9] + [43 74 84 75 85 86 75 80 67] + [Check] + [Amt Tend/TOTAL]
6