Transport And Storage; Requirements For Product Use - Festo DGE Serie Instrucciones De Utilizacion

DGE−...−ZR/−SP
3

Transport and storage

· Take into account the weight of the DGE−...
The DGE weighs up to 150 kg, depending on the design.
· Ensure the following storage conditions are met:
Short storage times
Cool, dry, shaded storage locations protected from corrosion
No oils, greases or fat−solvent fumes.
In this way you will maintain the performance of the toothed belt and the axis.
4

Requirements for product use

Warning
Unexpectedly fast moving masses can harm people or property (crushing).
· Apply power to the drive motor, at first limited to low speeds and torques.
Note
Malfunctions will occur if the device is incorrectly used.
· Be sure to always comply with the specifications in this chapter. In this way,
the product will perform as intended.
· Compare the limit values specified in these operating instructions with your
application (e.g. forces, torques, temperatures, masses).
Only compliance with the load limits allows operation of the product in
compliance with the relevant safety regulations.
· Take into consideration the ambient conditions at the location of use.
Corrosive elements in the environment (e.g. ozone) will reduce the service life
of the product.
· Observe also the regulations of the trade association, German Technical
Control Board (TÜV), the VDE or relevant national regulations.
Festo DGE−...−ZR/−SP 0909f English
45