Operation - Festo DGE Serie Instrucciones De Utilizacion

DGE−...−ZR/−SP
7

Operation

Warning
· Make sure that, in the positioning range of
the article
nobody can place his/her hand in the
path of the moving components
(e.g. by providing a protective screen)
there are no foreign objects.
It must not be possible to touch the DGE
until the mass has come to a complete
standstill.
If mounting in a vertical or diagonal position:
Warning
Falling masses can cause personal injury
and material damage (crushing). In case
of a power failure or broken actuator, the
movable mass falls down.
· Make sure that you only use motors
with an integrated spring−loaded holding
brake.
· Check whether external safety measures
are also necessary to prevent damage
from a broken actuator (e.g. toothed
latches, moving bolts or an emergency
buffer).
Note
A motor from Festo with spring−loaded holding brake holds masses at standstill
securely in position.
This type of brake is not suitable for braking masses in movement. Frequent
braking increases wear.
Festo DGE−...−ZR/−SP 0909f English
Fig. 37
Fig. 38
65