Polaris 380 Manual De Instrucciones página 2

Important Information
• Before installing the cleaner, make sure the pool filter is clean.
• New plumbing lines should be flushed out before installing the cleaner.
• The cleaner should not be used to remove plaster dust in new pools.
• Except when checking the wheel RPM, do not handle the cleaner while it is operating.
• Always remove the cleaner before swimmers enter the pool.
• Disconnect the cleaner from the pool wall when cleaning or backwashing the pool filter.
• Always remove the cleaner from the pool before chemical shock treatments.
• After cleaning or backwashing, let the filtration system run for at least five minutes before re-connecting the cleaner.
For customer service or support:
• Please mail Warranty Card immediately.
• For on-line support:
• To contact Polaris:
USE OF THIS CLEANER IN A VINYL LINER POOL. Certain vinyl liner patterns are particularly susceptible to rapid sur-
face wear or pattern removal caused by objects coming into contact with the vinyl surface, including pool brushes, pool toys, floats,
fountains, chlorine dispensers, and automatic pool cleaners. Some vinyl liner patterns can be seriously scratched or abraded simply
by rubbing the surface with a pool brush. Ink from the pattern can also rub off during the installation process or when it comes into
contact with objects in the pool. Zodiac Pool Systems, Inc., is not responsible for, and the Limited Warranty does not cover, pattern
removal, abrasion or markings on vinyl liners.
www.zodiacpoolsystems.com
US and Canada
Customer Service
2620 Commerce Way
Vista, CA 92081-8438
1-800-822-7933
CAUTION
www.zodiacpoolsystems.com