Content Of Delivery; Product Graphics; Loading; Activation - PAJ GPS POWER Finder Manual De Instrucciones

2.1 Content of delivery

Delivery contains:

POWER Finder by PAJ

M2M SIM card (is already inserted/ do not
replace)

USB charging cable

USB wall plug adapter

User Manual
Note: The latest version of this guide can be found
www.paj-gps.de/finder
The team of PAJ-GPS wishes you lots of fun with
your POWER Finder!

2.2 Product graphics

Battery terminal
SIM card
Turning
on/off
left = off
right = on
on:
LED signal
tray
POWER Finder by PAJ with Online-Tracking V.1.1 EN

2.3 Loading

Before first using, the GPS Tracker should be charged
for approx. 8-12 hours. Connect the supplied
charging cable to the charging port of the GPS
tracker. Then attach the USB port to the socket
adapter. If the GPS tracker is connected to the power
source, charge it until the red LED turns off.
The POWER Finder offers you a running time of
approx. 40 days without charging! However, it
should be noted that the duration depends on the
load. The more PAJ's POWER finder is moved and
the more alerts are sent, the higher the utilization.

2.4 Activation

Note: To activate you need the device ID. Please
make a note before installing your FINDER.
To use the POWER Finder by PAJ it must be activated
online first.
www.start.finder-portal.com
and follow the instructions.

2.5 Turning on

If the activation was successful, you can turn on the
POWER Finder by pushing the switch behind the
© PAJ UG (haftungsbeschränkt)
15
Please go to