Drying, Cycle, And Temperature Tips - Kenmore 110.88752 Manual De Uso

Load clothes l oosely intothedryer. Donotpack thedryer. Allow
space forclothes t otumble f reely. The following chart s hows
examples ofbalanced loads t hatwould allow forproper tumbling.
Heavy w ork 2 pairpants, 3workshirts
clothes
Delicates 1camisole, 2slips, 4 undergarments,
1setofsleep wear, 1half s lip
Towels 9 bath towels o r6 bath towels,
3 hand towels, 6washcloths
Mixed Load 2 pillowcases, 1T-shirt, 2shirts,
1pairpants
Knits 2 pants, 2 shirts; or3 dresses
Perm. P ress 6 shirts; or2 double s heets & 2 pillowcases;
or2single sheets & 2pillowcases
Select thecorrect cycle andtemperature foryourload.
Drying tips
• Follow care label directions when they are available.
• If you use fabric softener sheets, use only ones labeled as
dryer safe. Follow package instructions.
• Remove the load from the dryer as soon as tumbling stops to
reduce wrinkling. This is especially important for permanent
press, knits, and synthetic fabrics.
Cycle and temperature tips
• Dry most loads using the Normal Dry (*) setting.
• Use a More Dry setting for drying heavyweight items such
as towels and work clothes.
• Use a Normal Dry setting for drying medium weight items
such as sheets, underwear, permanent press fabrics, and
some knits.
• Use a Less Dry setting for drying lightweight items such as
lingerie, blouses, dresses, and some knits.
• Use a no heat (air) setting for rubber, plastic, or heat-sensitive
fabrics.
• Line dry bonded or laminated fabrics.
If you are unsure of the temperature to select for a load, select a
lower setting rather than a higher setting.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
AUTO DRY II
MORE DRY
NORMAL DRY
-- LESS DRY
OFF
AiR DRY 15
OFF
TOUCH UP
lO
2
OFF
110
10o
_0
80
0
_o TIMED DRY
Auto Dry II
Use this cycle to dry most loads. Dryness is determined by
thermostats that react to the amount of moisture in the air
exhausted from the dryer. Moist air indicates clothes are damp.
Dry air indicates that moisture has been removed.
This cycle includes a 10 minute (approximate) cool down period
at the end of the cycle to make clothes easier to handle and
reduce wrinkling.
ENERGY PREFERRED automatic dry settings are indicated by an
asterisk (*) on the timer dial, next to the words "Normal Dry". Use
this Normal Dry cycle to dry most heavy- to medium-weight
fabrics. When the cycle ends, check the dryness of the load.
• If the load is drier than you like, select a setting closer to
LESS DRY the next time you dry a similar load.
• If the load is not as dry as you like, complete drying using the
Timed Dry cycle. The next time you dry a similar load, select a
setting closer to MORE DRY.
NOTE: Drying time with an automatic cycle varies according to
the type of fabric, size of load and temperature setting. See
"Drying, Cycle, and Temperature Tips."
Timed Dry
Use this cycle to complete drying if items are still damp after the
Auto Dry II cycle. Timed Dry is also useful for heavyweight and
bulky items, such as bedspreads, work clothes, and large loads
that require a long drying time. Use this cycle to get up to
110 minutes of heated drying time. The heating cycle is followed
by a 10 minute (approximately) cool down period.
Touch Up
Use this cycle to smooth synthetic and permanent press clothes
that are clean but wrinkled from being crowded in a closet or
suitcase. This setting provides approximately 20 minutes of
heated tumbling followed by a 10 minute (approximately) cool
down period. Remove clothes immediately when tumbling stops.
24