Winding The Bobbin; Removing The Bobbin; Setting Up The Bobbin Winding; To Use The Additional Spool Pin - KENMORE ELITE 385.19365 Manual De Instrucciones

Winding the Bobbin
Removing the bobbin
Gently slide the hook cover plate release button to the
right and remove the cover plate,.
Lift out the bobbin
O Hook cover plate release button
(_ Hook cover plate
......... J
o Setting up the bobbin winding
[] Lift up the spool pin O. Place the spool of thread on
the spool pin with the thread (_ coming off the spool
as shown_ Attach the large spool holder (_), and
press it firmly against the spool of thread.
[] Guide the thread around the thread guide_
[_ Thread through the hole in the bobbin from the
inside to the outside_ Put the bobbin on the bobbin
winder spindle.
o To use the additional spool pin
Set the Spoo! stand under the additional spool pin,
place the felt, then insert into the hole,
(_ Spool pin
Q Spool
(_ Large spool holder
(_ Additional spool pin
@ Felt
(_ Additional spqol pin hole
0 Bobbin winder spindle
[]
"h f
J _ ........
32