Timeclock Operation - Lutron GRAFIK Eye QS System Manual De Instrucciones

Timeclock Operation

Set Time and Date
Main menu
1. Enter programming mode (see page 12).
2. Use the master buttons to highlight "Timeclock"
Timeclock
Timeclock
and press the OK button to accept.
Scene setup
3. Use the master buttons to highlight "Time & date"
and press the OK button to accept.
4. Use the master buttons to select between "12 Hr"
Timeclock
and "24 Hr" format for time display and press the
OK button to accept.
Holiday
5. Use the master buttons to select the current hour
Delete event
Time & date
and press the OK button to accept. Repeat for the
current minutes.
Set format
6. Use the master buttons to highlight the current
year and press the OK button to accept. Repeat
for the current month and date.
Del: 00 12 Hr
7. The info screen will display a confirmation screen
that your time and date have been saved.
8. Exit programming mode (see page 12).
Set time
08 : 00
AM
Set time
08 : 00 30
AM
Set date
Set date
Del: 00
2007
R
Set date
March
17
Saved
Saved
GRAFIK Eye QS System Installation and Operation Guide 23
®
Master
buttons
OK
OK
button