Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Step 10. Change the control panel
overlay (optional)
ENWW
If necessary, use the following
procedure to install the appropriate
control panel overlay for your
language.
1 Locate the control panel overlays in
the output bin of the printer. (These
overlays might have moved during
shipping.)
2 If necessary, remove the overlay
currently installed on the printer:
a Open the printer's top cover.
b Insert a thin, rigid object under the
edge of the overlay, and then pull
up on the overlay until it comes off.
c Close the top cover.
3 Place the desired control panel
overlay onto the control panel and
snap it into place.
start guide 19
Publicidad
Tabla de contenido
