Publicidad
Idiomas disponibles
Idiomas disponibles
Freezing the Picture
Press the STILL button to freeze a moving picture.
:_ Normal sound will still be heard. Press again to cancel.
>_ While V-Chip is in operation, the Still function cannot be used.
U
U
P.MOOE
&MODE
STL
_SlZE
Setting the HDMI Black Level
You can select the black level on the screen to adjust the screen depth.
1.
2.
3.
Press the MENU button to display the menu.
Press the A or T buttons to select "Setup", then press the ENTER button.
Press the A or T buttons to select "HDMIBlack Level",then press
the ENTER button.
Press the A or v' button to select "Normal", "Low", then press
the ENTER button.
This function is active only when the external input connects to HDMI
(RGB signals).
Press the EXIT button to exit.
Viewing Picture-in-Picture
This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV
channel in the main screen, and a different one in the PIP screen. Please see 'PIP Settings' below for details. You can use the PIP
feature to simultaneously watch two video sources. (See page 36 to select the PIP picture sound.)
>_ While V-Chip(See page 54) is in operation, the PIP function cannot be used.
Activatinq
Picture-in-Picture
1.
Press the MENU button to display the menu.
Press the A or T buttons to select "Setup", then press the ENTER button.
Press the A or T buttons to select "PIP", then press the ENTER button.
2,
Press the ENTER button again.
Press the A or T buttons to select "On", then press the ENTER button.
>_ If you turn the TV off while watching in PIP mode and turn it on again, the PIP
window will disappear
> You can view Analog TV broadcasts on the PIP screen (sub-picture) when
the main picture is from an connected PC to this TV.
Main picture
Sub picture
[i_q Alternately,you can press the PIP buttonon the remote control repeatedlyto activate or
deactivatethe PIP.
MTS
SRS
[_
I
II
SLEEP _l
_AOOIOEL C_
II
I
continued..
Publicidad
Capítulos
