Channel Control; Selecting The Antenna; Channels - Digital - Samsung LN-T2332H Instrucciones Del Propietario

Channel Control
Selecting the Antenna
1, Press the MENU button to display the menu.
Press the A or T buttons to select "Channel", then press the ENTER button.
2,
Press the ENTER button to select "Antenna".
Press the A or T buttons to select "Air" or "Cable",then press the ENTER
button.
Press the EXIT button to exit.
> If the antenna is connected to ANT 1 IN (AIR),
select "Air': and if it is connected to ANT 2 IN
(CABLE), select "Cable"
>- If both ANT 1 IN (AIR) and ANT 2 IN (CABLE)
are connected, select the antenna input you want.
If the antenna input is not selected properly, noise
may appear on the screen.
/_]_TENNACHLIST FAV.CH
Ill o o Ill
I I | REW • P PLAYIPAUSE FF I | I
Press the ANTENNA buttonon the
remote control.
Clearing Scrambled Channels - Digital
The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed.
It removes the scrambled channels from the list by tuning the digital cable channels. This process may take up to 20~30 minutes.
1, Press the MENU button to display the menu.
Press the A or T buttons to select "Channel", then press the ENTER button.
2,
Press the A or T button to select "Clear Scrambled Channel", then press the
ENTER button. It searches scrambled channels, which are to be removed from
the list.
> To stop searching scrambled channels.
Press the ENTER button to select Stop
Press the ENTER button to select Yes, then press the ENTER button.
3, When the scrambled channel searching is completed, press the ENTER button.
Press the EXIT button to exit.