Picture Control; Picture Settings - Samsung LN-T2332H Instrucciones Del Propietario

Picture Control
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard", "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button to select "Picture".
2. Press the ENTER button to select "Mode".
Press the A or T buttons to select the "Dynamic", "Standard", "Movie" picture
setting. Press the ENTER button.
_ Choose standard for the standard factory settings.
Choose Movie for a natural Image without picture enhancements,
3. Press the A or V buttons to select "Contrast", "Brightness", "Sharpness",
"Color", or "Tint(G/R)", then press the ENTER button.
4,
Press the _1or I_ buttons to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the l_ button increases it.
Press the ENTER button.
Press the EXIT button to exit.
>- • When you make changes to Contrast, Brightness, Sharpness, Color, Tint(G/R)
the OSD will be also adjusted accordingly.
• When in PC mode, Tint, Sharpness, and Color are not available.
Press the RMODE button on the remote control repeatedly to select the desired
picture mode.
ESlZE