Descargar Imprimir esta página

Troubleshooting - Samsung LN-T2332H Instrucciones Del Propietario

Ocultar thumbs Ver también para LN-T2332H:

Publicidad

Idiomas disponibles

Idiomas disponibles

Appendix
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Problem
Possibte Solution
Poor picture
Try another channel.
Adjus[ the antenna.
Check all wire connections.
Poor sound quality.
No picture or sound.
Try another channel.
Adjust tne antenna.
Try another channel.
Press the SOURCE button.
Make sure the TV s plugged Ir
Check the antenna connections.
No sound or sound is too low a[
maximum volume.
First check the volume of units connected to your TV (digital broadcasting receiver DVD.
cable broadcasting receiver. VCR. etc.). Then, adjust the TV volume accordingly.
Picture rolls vertically.
Check all wire connections.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operaung t again.
The TV won't turn on.
Make sure the wal outlet is ,vorK_ng.
Remote control malfunctions
"Check signal cable" message.
Replace the remote control r._atterles.
Clean tne upper edge of the remote contro transmission wlnoowJ.
Check the battery terminals.
Ensure that the slgna cable s firmly connected to the PC source.
"Not Supported Mode" message.
Check the maximum resolution and the frequency of the Video Adapter.
Compare tnese values _vith tne data ntne Display Modes.
Digital broadcasting screen
problem.
Please cnecK tne d gita signal strength and nput antenna.
The image is too light or too dark
Adjust the Brightness ane Contrast.
Adjust tne Fine tuning.
Black bars on the screen.
Picture has a Red/Green or Pink
tint.
Make sure the broadcast you're receiving is rllgn Definition HDt.
HD channels sometimes broadcast Standard Definition SD_ programming, ,vnlcn can
cause black bars.
Set your cable/satellite _)oxto stretch or wloescreen mode to eliminate the _)ars.
Make sure the Component cables are connected to tne correct aCKS.
Closed Captioning not working.
If you are using a Cable/Satellite box. you must set Closed Captionlnc on tne box. not
your TV.
Snowy Dic[ure
Your cable _)oxmay "leed a firmware upgrade Please contact your Cable company.
Ghosting on picture
This is sometimes caused _)ycompatibility issueswltn your cable Pox.
Try connecting Com_)onent cables instead

Publicidad

Capítulos

loading

Este manual también es adecuado para:

Ln-t2632hLn-t3232hLn-t3732hLn-t4032h