Viewing the Menus
1.
With the power on, press the MENU button.
The main menu appears on the screen. The menu' s left side has five icons:
Picture, Sound, Channel, Setup, Input.
2.
Use the A or _r buttons to select one of the five icons.
Then press the ENTER button to access the icon's sub-menu.
3.
Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available
channels are memorized, use the CN_-"_ or OH(-v)buttons to scan through the channels. This eliminates the need to change
channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel List).
Selectincl_theVideo Siclnal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to
the TV (i.e. an Air or a Cable system).
1.
Press the MENU button to display the menu.
Press the A or _' buttons to select "Channel", then press the
ENTER button.
2.
Press the ENTER button select "Antenna".
Press the A or T buttons to select "Air" or "Cable", then press the ENTER button.
Press the EXIT button to exit.