Samsung LN-T2332H Instrucciones Del Propietario página 67

Wall-Mount Adjustment (LN-T4032H)(Sold
separately)
Once the wall mount is installed, the position of your TV can be easily adjustable.
1, Connect to the EX-LINK jack on the optional wall mount bracket.
2, Press the MENU button to display the menu.
Press the A or T buttons to select "Setup", then press the ENTER button.
3, Press the A or T buttons to select "Wall-Mount Adjustment", then press the
ENTER button.
4, Adjust to the desired position using the A,_r,4 _ buttons.
6, Press the EXIT button to exit.
>_ Ifyou press an arrow button when no OSD is displayed on the TV screen, the
Adjustment screen appears.
Whenyou turn the power off, your TV moves to the initial installation position.
When you turn the power on, your TV moves to the last remembered position
you adjusted.
Using the Remote Control Buttons
Button Operations
Wall-mount angle adjustment Tilt Up, Tilt Down, Move right, Move left
(_ Reset
Moves to the initial installation position
Remembers 3 positions with the Red, Green
Remembering the position and Yellow buttons.
m e_ _ and moving to the
remembered position Moves to the remembered position using
these 3 color buttons.
For installation, refer to the Installation Manual provided.
> Forproduct installation and the installation and moving of the wall mount,
make sure to consult a specialized installation company.
> This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer