Maintenance And Cleaning; Avoiding Bad Odors; Protecting The Plastic Surfaces; Door Glasses - Beko RCNE520E31ZM Manual Del Usuario

6

Maintenance and cleaning

Service life of the product is increase if it is regularly
cleaned
B
WARNING:
before cleaning your refrigerator.
• Never use any sharp and abrasive tools, soap,
household cleaners, detergent and wax polish
for cleaning.
• Dissolve one teaspoon of carbonate in half liter
of water. Soak a cloth with the solution and
wrung it thoroughly. Wipe the interior of the
appliance with this cloth and the dry thoroughly.
• Make sure that no water enters the lamp
housing and other electrical items.
• Clean the door with a damp cloth. To remove
door and body shelves, remove all of its
contents. Remove door shelves by moving them
upwards. After cleaning, slide them from top to
bottom to install.
• Never use cleaning agents or water that
contain chlorine to clean the outer surfaces and
chromium coated parts of the product. Chlorine
causes corrosion on such metal surfaces.
• Do not use sharp, abrasive tools, soap,
household cleaning agents, detergents,
kerosene, fuel oil, varnish etc. to prevent
removal and deformation of the prints on the
plastic part. Use lukewarm water and a soft
cloth for cleaning and then wipe it dry.

6.1. Avoiding bad odors

Materials that may cause odor are not used in
the production of our appliances. However, due
to inappropriate food preserving conditions and
not cleaning the inner surface of the appliance as
required can bring forth the problem of odor.
Therefore, clean the refrigerator with carbonate
dissolved in water every 15 days.
First unplug the product
• Keep the food in closed containers. Microorganisms
spreading out from uncovered containers can cause
unpleasant odours.
• Never keep the food that have expired best before
dates and spoiled in the refrigerator.

6.2. Protecting the plastic surfaces

Clean with arm water immediately as the oil may cause
damage on the surface when it is poured on plastic
surfaces.

6.3. Door Glasses

Remove the protective foil on the glasses.
There is a coating on the surface of the glasses.This
coating minimizes the stain build-up and helps to
remove the possible stains and dirt easily.Glasses that
are not protected with such a coating may be subject
to persistent binding of air or water based organic
or inorganic dirt such as limescale, mineral salts,
unburned hydrocarbons, metal oxides and silicones that
can easily and quickly cause stains or material damage.
Keeping the glass clean becomes too difficult despite
the regular cleaning. Consequently, the appearance
and the transparency of the glass deteriorates. Harsh
and corrosive cleaning methods and compounds will
intensify these defects and speed up the deterioration
process.
Water-based cleaning products that are not alkaline and
corrosive must be used for regular cleaning purposes.
Non-alkaline and non-corrosive materials must be used
for cleaning so that the service life of this coating lasts
for a long time.
These glasses are tempered to increase their durability
against impacts and breaking.A safety film is also
applied to their rear surfaces as an extra safety
measure in order to prevent them from causing damage
to their surrounding in case of a breakage.
*Alkali is a base that forms hydroxide ions (OH¯) when it
is dissolved in water.
Li (Lithium), Na (Sodium), K (Potassium) Rb (Rubidium),
Cs (Cesium) and artificial and radioactive Fr (Fan-sium)
metals are called ALKALI METALS.
28 /31 EN
Refrigerator / User Guide