Replace The Gas Grill Orifice-If Equipped With Solid-Plate Style Grill - Thermador Professional PLPKIT Instrucciones

• Replace the Grill Grate such that the raised food
containment rail is oriented toward the back of the Grill.
• The "1.20MM"-stamped hood orifice is sized to
produce 17,000 BTU/hr. [4.98 kW], using Propane (LP)
Gas.
• After the orifice conversion, gas leak check, and re-
installation of the grill burner, check that the electrode
and bracket spacing to the burner is within the distance
range shown here.
• Verify that the grill burner's air shutter is properly re-
adjusted, per the "Burner Testing and Adjustment"
section of these instructions, as air-shutter position can
also influence ignition performance.
Replace the Gas Grill Orifice—if equipped
with Solid-Plate Style Grill
This style grill design can be identified by its ribbed grill
plate and its "T" shaped burner, as shown in the exploded
view.
• Remove the Grill Plate. Some Grills have a Grill Plate
and Frame as two separate pieces, similar to the Gas
Griddle on the next pages.
English 7