Island Trim Cabinet Clearance Requirements For The; 60'' Models Only; Low Backguard Cabinet Clearance Requirements (Purchased Separately); 30'' 5-Burner Cabinet Clearance Requirements With An Otr Microwave - Thermador Professional Pro Grand Serie Manual De Instalación

Island trim cabinet clearance
requirements for the 60'' range only
35 ⅞" (911) – 35 ⅞" (911) – 35 ⅞" (911) –
36 ¾" (933) 36 ¾" (933) 36 ¾" (933)
Low backguard cabinet clearance
requirements (purchased separately)
35 ⅞" (911) – 35 ⅞" (911) – 35 ⅞" (911) –
36 ¾" (933) 36 ¾" (933) 36 ¾" (933)
30'' 5-burner cabinet clearance
requirements with an OTR microwave
inches (mm)
• 30'' (762 mm) minimum to non-combustible material
above the cooking surface.
• * Refer to OTR manufacturer's installation manual for
clearances.
 as defined in the "National Fuel Gas Code" (ANSI Z223.1, Current
inches (mm)
Edition). Clearances from non-combustible materials are not part of
the ANSI Z21.1 scope and are not certified by CSA. Clearances of less
than 6'' (152 mm) should be approved by the local codes and/or by
the local authority having jurisdiction. There is a possibility to discolor
the back wall under certain cooking conditions.
35 ⅞" (911) – 35 ⅞" (911) – 35 ⅞" (911) –
36 ¾" (933) 36 ¾" (933) 36 ¾" (933)
inches (mm)
8