Assigning The Ip Address Using The Setup Program - Sony SNC-RZ50N Manual De Instalación

Ocultar thumbs Ver también para SNC-RZ50N:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assigning the IP Address
Using the Setup Program
1
Insert the supplied CD-ROM
disc into your CD-ROM drive.
A cover page appears automatically in
your Web browser.
If it does not appear automatically in the
Web browser, double-click on the
index.htm file on the CD-ROM.
2
Click the Setup icon of IP Setup
Program.
The File Download dialog opens.
3
Click Open.
Note
You cannot install the IP Setup Program
properly if you click Save in the File
Download dialog.
Delete the downloaded file, and click the
Setup icon again.
4
Install the IP Setup Program to
your computer following the
wizard displayed.
If "Software License Agreement" is
displayed, read it carefully and accept
the agreement to continue the
installation.
5
Start the IP Setup Program.
The program detects the network
camera(s) connected on the local
network and lists it (them) on the
Network tab window.
6
Click the camera to which you
want to assign a new IP address
in the list.
The network settings for the selected
camera are displayed.
7
Set the IP address.
To obtain the IP address
automatically from a DHCP
server:
Select Obtain an IP address
automatically.
The IP address, Subnet mask and
Default gateway are assigned
automatically.
To specify the IP address
manually:
Select Use the following IP address,
and type the IP address, Subnet mask
Assigning the IP Address to the Camera
23
GB

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Snc-rz50p

Tabla de contenido