Important Safety Instructions - Haier ESD100 Manual Del Usario

Lavaplatos empotrable
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT S AFETY INSTRUCTIONS
Warning
- To reduce
the
risk
of
fire,
electric
shock,
or
injury
to persons
when
using
your
appliance,
follow
basic
precautions,
including
the
following:
1.
Read
all
instructions
before
using
the
appliance.
2.
Use this appliance
only for its intended
purpose
as described
in this use and
care guide.
3.
Use only automatic
dishwashing
detergent
and rinse agent
recommended
for
use in this appliance
and keep them out of the reach of children
because they
are corrosive
and can be harmful.
4.
This appliance
must be properly
installed
in accordance
with the installation
instructions
before it is used.
5.
Never unplug
your appliance
by pulling
on the power
cord. Always
grasp the
plug firmly and pull straight out from the outlet.
6.
Replace immediately
worn
power
cords, loose plugs/power
outlets.
7.
Unplug
your appliance
before cleaning
or before making
any repairs.
8.
Do not open the dishwasher
door immediately
after completion
of wash process
or during
the operation
as hot air/steam
may cause personal
injury. Press the
door latch, wait few seconds by allowing
cold air to go in and then open the
door.
9.
Do not operate
your appliance
in the presence of explosive
fumes.
10. Do not add or mix any flammable
or explosive
substances
to the wash.
1 1. Appliance
loading
door must be closed during
the operation
of the machine.
12.
Do not operate your appliance
when parts are missing or broken.
13.
Do not use this appliance
for commercial
dishwashing
purpose.
14.
Do not operate
this appliance
unless all enclosure
panels are properly
in place.
15.
Do not tamper with controls.
16. To reduce
risk of injury do not allow children
to play in or on the appliance.
Close supervision
of children
is necessary
when the appliance
is used
near children.
17. This appliance
must be connected
to proper
electrical
outlet with the correct
electrical
supply.
18. Proper grounding
must be ensured
to reduce the risk of shock and fire. DO
NOT CUT OR REMOVE
THE GROUNDING
PLUG. If you do not have a
three-prong
electric
receptacle
outlet in the wall, have a certified
electrician
install the proper
receptacle.
The wall receptacle
MUST be properly
grounded.

Publicidad

Tabla de contenido
loading

Tabla de contenido