Remington I-LIGHT REVEAL Guía De Uso Y Cuidado página 14

ENGLISH
CLEANING YOUR i-LIGHT REVEAL DEVICE
C
F CAUTION: Before cleaning your i-Light REVEAL, make sure that the device is switched off and the
charging cord is disconnected from the device.
• Regular cleaning helps to ensure optimal results and a long life for the device.
• Use a clean, lint-free cloth (one is provided with the device) or a cotton swab to gently wipe the
surface and the Flash Window, Treatment Head and the Skin Tone Sensor. If needed, you can dampen
the cloth or cotton swab with water and mild soap.
• Allow the device to dry completely before using again.
F WARNING: If the Flash Window is cracked or broken, the unit must not be used. Never scratch the filter
glass or the metallic surface inside the Treatment Head.
F CAUTION: The i-Light is a high voltage device. Never immerse in water. Never clean the unit or any of
its parts under a tap or in a dishwasher.
• Do not use petroleum-based or flammable cleaning agents because of the risk of fire. Never use
scouring pads, abrasive cleaning agents or aggressive liquids such as oil or acetone to clean the unit.
TROUBLESHOOTING / STORAGE / MAINTENANCE
E
, i-Light Reveal Device Maintenance
F CAUTION: Before performing maintenance on your device, ensure the device is switched off and
the power cord is disconnected from the base unit.
, Replacing the Treatment Head
• The treatment head can deliver 6,000 flashes regardless of the energy level setting. When the Treatment
Head has used up its flashes, it must be replaced.
• The 'Bulb Life Remaining' icon on the display warns you when the number of remaining flashes is low.
Fig. 21.
14
Fig. 21
01