Remington I-LIGHT REVEAL Guía De Uso Y Cuidado página 19

ENGLISH
Problem
A flash of light is not emitted
when I press the Flash Button
Possible Cause
The device needs some time to
cool down. You should hear the
decice 'beep' once and the LCD
display will show this screen:
The room is too warm for the
device to cool down.
Action
Wait a few minutes for the
device to cool down. Do not
turn the device off as this screen
will disappear once the device is
ready to use again. Under
normal conditions, this is
uncommon, however this can
arise if the unit becomes too
hot.
Use i-Light REVEAL in a cooler
environment where the
temperature is less than 27°C (or
80°F).
19