Grundig Globe Traveler G3 El Manual Del Propietario página 8

ACCESSING STORED MEMORIES
1. Turn on the G3 and enter PAGE/MEMO mode by pressing the
PAGE/TIME button, causing PAGE/MEMO to appear in the display.
2. Select the desired memory page with the
3. Select the desired memory by pressing buttons F1-7.
LABELING MEMORY PAGES
Memory pages can be uniquely labeled with 8 intermixed letters, digits
or symbols.
1. Turn on the G3 and enter PAGE/MEMO mode by pressing the PAGE/
TIME button, causing PAGE/MEMO to appear in the display.
2. Press the LIGHT/EDIT button until '_' appears in the display
(about 3 seconds).
3. Use the tuning knob to select the desired letter, digit or symbol.
4. Press the PAGE/TIME button to select the next '_'.
5. Repeat until up to 8 letters/digits/numbers are selected.
6. Press PAGE/TIME when finished.
USING THE COPY/PASTE FUNCTION
This feature enables copying of one memory or the entire contents of a
page from one location to another.
COPYING AND PASTING ONE MEMORY LOCATION TO ANOTHER
1. With the G3 turned on, press and release the PAGE/TIME button,
causing PAGE to appear in the display.
2. Press to select the page that you wish to copy a memory from.
3. Press the COPY/PASTE button until you see COPY flashing in the
display, then press the F1-7 button that you want to copy from.
4. To paste to the same page, press the F1-7 button that you wish to
paste to; if you wish to change pages, use the
and then press the F1-7 button that you wish to paste to.
5. Press the PAGE/TIME button when finished.
14
GLOBE TRAVELER G3 OWNER'S MANUAL
buttons.
buttons to do so
USING THE COPY/PASTE FUNCTION continued
COPYING AND PASTING AN ENTIRE MEMORY PAGE
1. With the G3 turned on, press and release the PAGE/TIME button,
causing PAGE to appear in the display.
2. Press to select the page to be copied.
3. Hold down the COPY/PASTE button until you see COPY flashing in
the display, then do a quick, short press of the COPY/PASTE button
(PASTE flashes in the display).
4. Press selecting the paste-to page.
5. Do a quick, short press of the COPY/PASTE button to paste it.
6. Press the PAGE/TIME button when finished.
DELETING A SELECTED MEMORY
1. Turn on the G3 and enter PAGE/MEMO mode by pressing the PAGE/
TIME button, causing PAGE/MEMO to appear in the display.
2. Select the desired memory page with the
3. Press the ERASE button for about 2 seconds or until DEL starts
flashing in the display.
4. Press the F1-7 button that you wish to erase. Note that the box
surrounding the memory location disappears.
5. To select another memory page press the
the process.
6. Press PAGE/TIME to exit PAGE/MEMO mode.
DELETING ALL OF A MEMORY PAGE'S CONTENTS
1. Turn on the G3 and enter PAGE/MEMO mode by pressing the
PAGTIME button, causing PAGE/MEMO to appear in the display.
2. Select the desired memory page with the
3. Press the ERASE button for about 2 seconds or until DEL starts
flashing in the display.
4. Press the ERASE button for about 2 seconds – all boxes around F1-7
will disappear.
5. Press PAGE/TIME to exit PAGE/MEMO mode.
GLOBE TRAVELER G3 OWNER'S MANUAL
buttons.
buttons and repeat
buttons.
15