Accessories; Installation - Klarstein Delaware Manual De Instrucciones

ACCESSORIES

Positioning of shelves and door compartments
The refrigerator is equipped with several shelves that can
be positioned as required. To enable the storage of food
packaging of different sizes, the door compartments can
be mounted at different heights. Pull out the balcony and
then reposition it as needed by pressing it on two of the
curved brackets until it is firmly seated.

INSTALLATION

Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit
on something solid so that it will not slip during the door removing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It's better that 2 people handle the unit during assembly.
1
Remove the top right
hinge cover.
2
Undo the screws. Then
remove the hinge
bracket.
3
Remove the top left
screw cover.
EN
21