Controls And Ports - trekstop I.GEAR SSD-STICK PRIME DUO Manual De Instrucciones

7.

Controls and ports

A B
A) Protective cap
B) USB-A connection
C) LED
D) USB-Type-C™ connection
8. Connect the SSD stick to the computer
The SSD stick can be connected to the computer directly or using the USB C
extension cable included. The extension cable is used if the SSD stick cannot be
connected to the computer directly for space reasons.
a) Remove the protective cap from the SSD stick.
b) Connect the SSD stick or the extension cable to a compatible USB port
on your computer.
The LED lights up, the SSD stick is recognised by your computer and displayed in
disk management.
i ADVICE
Use the function "Safely Remove Hardware" in order to remove the SSD stick
from the computer in a proper fashion.
9. Notes on copyright and trademarks
Copyright law prohibits the copying of the content of this document
(illustrations, reference documents etc.), as a whole or in part, without the
permission of the copyright holder.
Microsoft, Windows and Windows 10 are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
TREKSTOR is a registered trademark of TREKSTOR Ltd. in the European
Community and other countries. Copyright © 2019 TREKSTOR GmbH.
All rights reserved.
Some product or company names mentioned elsewhere may be brand names
or trade names of the respective proprietor.
C
12
D A