Panasonic KX-UT248 Manual De Instrucciones página 12

Installation and Setup
When selecting Ethernet cables (not included)
• Use flexible, high-quality, snagless (without strain relief) cables. Do
not use cables with coating that may tear or crack when bent.
To prevent damage to the cables, use cables that do not protrude from
the bottom of the base.
Connect the cables as shown in the following illustration.
Incorrect
Ethernet cable
• Use a straight CAT 5e (or higher) Ethernet cable (not included) that is
6.5 mm in diameter or less.
When connecting to a switching hub
• If PoE is available, an AC adaptor is not needed.
• This unit complies with the PoE Class 3 standard.
When connecting a PC
• Only a PC can be connected to the PC port. Other SIP phones,
or network devices such as routers or switching hubs, cannot be
connected.
• The PC port does not support PoE for connected devices.
When connecting cables and the AC adaptor
• Ensure that the Ethernet cables and the AC adaptor cord are clamped
to prevent damage to the connectors.
When registering a Bluetooth headset
• One Bluetooth headset can be registered to this unit. For details, see
the Operating Instructions.
12
For up-to-date information about headsets that have been tested
with this unit, refer to the following web sites:
https://panasonic.net/cns/pcc/support/sipphone/
Correct
Ethernet cable
60 mm or less