Before First Use; Installation; Initial Settings - Krups EA88 Serie Manual De Instrucciones

Danger: The appliance should be plugged into a 230V - 240V AC socket outlet with an
earth connection. Otherwise, you could be exposed to fatal injuries due to electric
shock!
Respect the safety guidelines indicated in the "Safety guidelines" leaflet.

Initial settings

When using the appliance for the first time you are asked to perform certain settings. Follow
the instructions that appear on the display. The aim of the following paragraphs is to give you
some visual aids.
Turn on the appliance by pressing the On/Off (S) button. Let the appliance guide you.
These are the first settings requested:
Language
Select a display language by pressing on the arrows until the required language appears.
Press "OK" to validate.
Country
Select your county of residence by pressing the arrows until the country appears.
Press "OK" to validate.
If your country does not appear on the list, press OTHER.
The appliance will also ask you to set the following parameters:
Hotline number for your country of residence
If you do not know the hotline number for the country you entered in the list, you can search
for it on the Internet site indicated on the screen.
Unit of measurement
You can select whether you would like to use oz or ml as your volume unit.
Date and time
To set the time, click on the required time format (24H or AM/PM).
Auto on / Auto off
It is possible to set the time at which you would like the appliance to turn on automatically
every day. Select the time at which you would like the appliance to start automatically using
the previously selected time format.
You can also choose the time after which your appliance will automatically switch off (time
without use).
Water hardness
You must set your appliance based on the water hardness, between 0 and 4.
Information on water hardness:
Before using the appliance for the first time, determine the hardness of your water so that you
can adjust the appliance to this hardness. You should also do this when you are using your
appliance in a location where the water hardness is different or you notice a change in the water
hardness. To determine the water hardness, use the strip supplied with the appliance or contact
your water company.
The table below contains information on the different classes:
26
BEFORE FIRST USE INSTALLING
THE APPLIANCE