Advanced Functions - SOMFY Sunilus io Guia De Instalacion

7.2. Adding/deleting Somfy io control points and io sensors
Refer to the corresponding guide.
7.3. Modifying the end limits
The upper and lower end limits can be modified.
Readjusting the upper end limit
Set the awning to the upper end limit .
1)
Press the Up and Down buttons simultaneously until
2)
the awning makes a movement: the motor is in setting
mode.
Adjust the upper position of the awning using the Up or
3)
Down button.
Press the "my" button until the awning makes a move-
4)
ment: the new upper end limit has been programmed.
Readjusting the lower end limit
Set the awning to the lower end limit.
1)
Press the Up and Down buttons simultaneously until
2)
the awning makes a movement: the motor is in setting
mode.
Adjust the lower position of the awning using the Up or
3)
Down button.
Press the "my" button until the awning makes a move-
4)
ment: the new lower end limit has been programmed.

7.4. Advanced functions

Contact the awning's manufacturer before using this function to check the compatibility of your
systems.
Back impulse" function
This function allows you to tighten the fabric each time the awning is lowered. It is possible to adjust
it until ½ turn of roller tube.
This function is not appropriated for vertical awnings.
To activate this function:
Set the awning to the lower end limit.
1)
Press the «my» and Up buttons simultaneously until the
2)
awning makes a movement : the motor is in programming
mode.
Adjust the fabric's tension using the Up or Down buttons
3)
(½ turn of tube max).
Press the "my" button until the awning makes a move-
4)
ment: the fabric's tension has been programmed.
Copyright © 2010 Somfy SAS. All rights reserved.
Sunilus io / Sunilus screen io
1 2
3 4
1 2
3 4
1 2
3 4
7