Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PART GUIDE – HTF1220 SERIES
1
1. Front Grille
2. Blade
3. Plastic Nut
4. Rear Grille
5. Motor Shaft
6. Oscillation Select
7. Fan Body
8. Blade Nut
9. Speed Control Buttons
10. Base
11. Grill Locking Clips
12. Fan Head Assembly
13. Prongs
BASE ASSEMBLY – HTF1220WC SERIES
1.
Insert the Fan Body assembly into the base until it clicks into place.
ASSEMBLY OF THE BLADE AND GRILLES – HTF1220, HSF1630 SERIES
1.
Unscrew the blade nut clockwise and the plastic nut counterclockwise and set aside.
2.
Position the rear grille onto the fan head assembly making sure the two alignment holes are
aligned with the two prongs.
3.
Screw on plastic nut tightly clockwise to attach rear grille.
4.
Install the blade onto the shaft until the retaining pin fits into the notch on the blade.
5.
Screw blade nut to the motor shaft counterclockwise (tighten by turning to the left).
6.
Mount the front grille and secure using the locking clips.
2
11
2
4
12
5 13
6
3
8
9
10
PART GUIDE – HSF1630 SERIES
1. Main Pole
2. Cross Base
3. Cross Base Screws
4. Base Sheath
5. Pole Locking Nut
6. Extension Pole
7. Fan Head Assembly
8. Locking Screw
9. Blade Nut
10. Plastic Nut
11. Rear Grille
7
12. Motor Shaft
13. Alignment Holes
14. Prongs
15. Fan Blade
16. Front Grille
17. Oscillation Knob
18. Locking Clips
BASE ASSEMBLY – HSF1630 SERIES
1.
Position the main pole on the cross base, and align with the four holes. Use the four screws
provided to secure and tighten the pole to the cross base.
2.
Slide the stand base sheath over the cross base screws.
3.
Loosen the pole extension locking nut around the top of the main pole and raise the chrome
extension pole to its desired height. Tighten the pole extension locking nut.
4.
Position the fan head assembly onto the extension pole and tighten the locking screw.
11
14
12
10
9
13
18
15
16
6
1
2
4
17
7
8
5
3
3
Publicidad
Tabla de contenido
