Cleaning; Descale - all-clad EH800D51 Guia Del Usuario

• Always unplug the Sous Vide Circulator and allow to cool completely before cleaning.
• To remove dirt from the shaft, gently press the release button and slide out the shaft from the body.
• Use soapy water to clean the shaft and circulator.
• Clean the appliance body with a damp cloth.
NOTE: The shaft is dishwashable.
CAUTION: Do not allow debris to accumulate, as this may damage the heater and circulator.
DANGER: Never immerse the circulator in water.
CAUTION: Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to
clean the circulator.
CAUTION: Any other servicing should be performed by an authorized service representative.
Why descale?
• Limescale naturally builds up around the heating elements if the water you are using is hard. Descaling helps to
maintain your appliance so that it lasts longer and offers constantly offers high quality performance. Limescale
can permanently alter the performance of your appliance. Malfunctions linked to scaling are not covered by the
warranty if the product is returned.
When to descale?
• The descaling frequency depends on the hardness of the water and the number of uses. If you notice the following
signs: longer cycle time, more noise at the end of the cycle, stopping midcycle, your machine needs descaling.
20
C L E A N I N G
D E S C A L E