Troubleshooting - all-clad EH800D51 Guia Del Usuario

How to descale your All Clad Sous Vide Circulator
• Pour an equal amount of vinegar and water into a container.
• Start a cycle of regular cycle of 30 min with a temperature set at 140°F / 60°C.
• At the end of the cycle, your appliance should be clean, if not, simply extend the cycle duration or repeat the
process.
PROBLEM
The Sous Vide Circulator does not work.
Low water level
There is a loud noise from Sous Vide Circulator
T R O U B L E S H O O T I N G
SOLUTION
Make sure the plug is properly inserted into the wall
socket.
If Sous Vide Circulator still does not work, consult an
authorized All-Clad service center.
Turn off the Sous Vide Circulator, add more water to
reach the MIN mark below MAX mark.
Turn off the Sous Vide Circulator, unplug electrical
cord, remove the heater protector, to check and clean
if anything is stuck to the circulator.
EN
21