Scrapping Old Appliances - Candy CMDN 182 EU Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
for 4 hours. This allows time for the coolant to settle.
Installation
Don't cover or block the vents or grilles of your
appliance.
If you're not at home for a long time
• Turn off the refrigerator first and then unplug the
unit from the wall outlet.
• Remove all the food.
• Clean the refrigerator.
• Leave the lid open slightly to avoid possible
formation of condensation, mold, or odors.
• Use extreme caution in the case of children. The
unit should not be accessible to child's play.
• Short vacations: Leave the refrigerator operating
during vacations of less than three weeks.
• Long vacations: If the appliance will not be used
for several months, remove all food and unplug
the power cord.
Clean and dry the interior
thoroughly. To prevent odor and mold growth,
leave the door open slightly: blocking it open if
necessary or have the door removed.
How to save energy
• Install the refrigerator in the coolest part of the
room, out of direct sunlight and away from heating
ducts or registers. Do not place the refrigerator next
to heat-producing appliances such as a range, oven
or dishwasher.
• The refrigerator door should remain open only as
long as necessary; do not place hot food inside the
refrigerator.
• Organize
the
refrigerator
openings .Remove as many items as needed at one
time and close the door as soon as possible.
• The refrigerator door should be properly closed to
avoid increased energy consumption, and the
formation of excess ice and / or condensation inside.
• Constantly
circulating
temperature homogenous inside the
For this reason, it is important to properly distribute
the food, to facilitate the flow of air.
• Cover foods and wipe containers dry before placing
them in the refrigerator. This cuts down on moisture
build-up inside the unit.
• Do not overcrowd the refrigerator or block cold
airvents. Doing so causes the refrigerator to run
longer and use more energy. Shelves should not be
lined with aluminum foil, wax paper or paper
toweling. Liners interfere with cold air circulation,
making the refrigerator less efficient, which could
cause food spoilage.
• During prolonged absences (example: vacations), it
is advisable to disconnect the refrigerator, remove
all the food, and clean it . The door should be left
slightly open to avoid mold and unpleasant odors.
This will not affect the refrigerator when it is
reconnected.
• During short absences (example: holidays), the
refrigerator can remain on. However, remember
that prolonged power outages may occur while you
are gone.
to
reduce
door
cold
air
keeps
the
refrigerator.
TROUBLE SHOOTING
If the appliance does not operate when switched on,
check.
Power cut: If the internal temperature of the
Fridge/Freezer compartment is -18°C or less when
the power returns, your food is safe. The food in your
Fridge/Freezer will remain frozen for approx 16 hours
with the door closed. Do not open the Fridge/Freezer
door more than necessary.The product is designed
and built for domestic household use only.
The plug is inserted properly in the socket and that
the power supply is on. (To check the power supply to
the socket, plug in another appliance).
The fuse has blown/circuit breaker has tripped/main
distribution switch has been turned off.
The temperature control has been set correctly.
If the refrigerator is exceptionally cold, you may have
accidentally adjusted the thermostat control dial to a
higher position.
If he refrigerator is exceptionally warm, the
compressor may not be working. Turn the thermostat
control dial to the maximum setting and wait a few
minutes. If there is no humming noise, it is not
working. Contact the local store where your purchase
was made.
If condensation appears outside of the Refrigerator,
this may be due to a change in the room temperature.
Wipe off any residue of moisture. If the problem
continues contact the local store where your
purchase was made.
If he provided plug has been replaced, make sure the
new plug is properly connected. If the appliance is
still not operating after the above checks, please
contact Customer Service.

SCRAPPING OLD APPLIANCES

32

Publicidad

Tabla de contenido
loading

Tabla de contenido