Standard Equipment; Optional Equipment; Frequencies - RIDGID NaviTrack II Manual Del Usuario

NaviTrack
Signal Strength..............Non-linear in function. (2000
is 10x higher than 1000, 3000
is 10x higher then 2000, etc.)
Operating Environment
Temperature................-4°F to 122°F (-20°C to 50°C)
Humidity ......................5% to 95% RH
Storage Temperature .....-4°F to 140°F (-20°C to 60°C)
Default Settings
The default settings for the locator are:
• Measured Depth units = Feet & Inches,
• Volume = 2 (two settings above mute),
• Backlight = Auto
• 512 Hz (Sonde) Default Mode
Optional Settings
The optional settings for the locator are:
• Measured Depth units = Meters,
• Volume = 0 (mute) to 5,
• Backlight = On, Off
• Mode: Active Line Trace, Passive Line Trace

Standard Equipment

Catalog
No. Description
96967 NaviTrack II Locator
12543 Surface Markers and Clip
22388 Molded Carrying Case
—
Operator's Manual
—
Quick-Start Guide

Optional Equipment

Catalog
No. Description
14818 NaviTrack Line Transmitter – 10 Watt
20168 NaviTrack Brick Transmitter – 5 Watt
20503 Inductive Clamp (4.75")
16728 Remote Transmitter (Sonde)
19793 Float Sonde (Package of 2)
12543 Surface Markers and Clip
4
® II
(Downloadable @ www.navitrack.com)
(Downloadable @ www.navitrack.com)
Ridge Tool Company

Frequencies

Default Frequencies
Sonde ........................512Hz
Active Line Trace.......128Hz 1kHz, 8kHz, 33kHz,
262kHz (European: 93kHz)
Passive Line Trace ....60Hz (9th)
Optional Frequencies
Sonde ........................16Hz, 640Hz, 850Hz, 8kHz,
16kHz, 33kHz
Active Line Trace.......200kHz
Passive Line Trace ....50Hz (9th)
Nominal and Exact Frequency Values (NaviTrack II)
Sonde 16 Hz
512 Hz
640 Hz
850 Hz
8 kHz
16 kHz
33 kHz
Active Line 128 Hz
Trace 1 kHz
8 kHz
33 kHz
200 kHz
262 kHz
Passive Line 50 Hz
Trace (9th harmonic)
60 Hz
(9th harmonic)
(European) 93 kHz
93 kHz -B
(See note on 93 kHz Frequencies on page 17.)
16
512
640
850
8192
16384
32768
128
1,024
8,192
32,768
200000
262,144
450
540 Hz
93,696.0
93,622.9