Advertencias E Instrucciones De Seguridad Generales; Lea Las Instrucciones; Normas De Seguridad / Definiciones; Instrucciones Importantes De Seguridad - Stanley PC509 Manual De Instruccion

Ocultar thumbs Ver también para PC509:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Equipment being operated draws too much power
Reduce load to maximum 500 watts.
Inverter in thermal shutdown condition
Allow inverter to cool down. Ensure there is adequate ventilation around the unit and that the load is no more than 500 watts for
continuous operation.
AC output is shorted
Unplug the AC appliance. Turn off the inverter. Disconnect the unit from any 12 volt DC power source. Check the appliance cord.
ACCESSORIES
Recommended accessories for use with your tool are available from the manufacturer. If you need assistance regarding accessories,
please contact the manufacturer at (877) 571-2391.
WARNING: The use of any accessory not recommended for use with this appliance could be hazardous.
SERvICE INfORmATION
Si usted necesita asesoramiento técnico, reparación, o partes genuinas del fabricante, póngase en contacto con el fabricante en
(877) 571-2391.
ONE-yEAR LImITED wARRANTy
The manufacturer warrants this product against defects in materials and workmanship for a period of ONE (1) YEAR from the date
of retail purchase by the original end-user purchaser ("Warranty Period").
If there is a defect and a valid claim is received within the Warranty Period, the defective product can be replaced or repaired in the
following ways: (1) Return the product to the manufacturer for repair or replacement at manufacturer' s option. Proof of purchase
may be required by manufacturer. (2) Return the product to the retailer where product was purchased for an exchange (provided
that the store is a participating retailer). Returns to retailer should be made within the time period of the retailer' s return policy
for exchanges only (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their
specific return policy regarding returns that are beyond the time set for exchanges.
This warranty does not apply to accessories, bulbs, fuses and batteries; defects resulting from normal wear and tear, accidents;
damages sustained during shipping; alterations; unauthorized use or repair; neglect, misuse, abuse; and failure to follow
instructions for care and maintenance for the product.
This warranty gives you, the original retail purchaser, specific legal rights and you may have other rights which vary from state to
state or province to province. This product is not intended for commercial use.
Please complete the Warranty Activation Card and return within 30 days from purchase of the product to: Baccus Global LLC, 595 S.
Federal Highway, Suite 210, Boca Raton, FL 33432. baccus Global LLC, toll-free number: (877) 571-2391.
SpECIfICATIONS
Maximum power:
500 watts continuous
Input voltage:
12.5 volts DC, 48 amps
Output voltage:
110-125 volts AC, 60Hz
Output waveform:
Modified Sine Wave
USB:
5VDC, 500mA
DC plug fuse:
10A/250V
Imported by
Baccus Global LLC
595 S. Federal Highway, Suite 210
Boca Raton, FL 33432
(877) 571-2391
PC509_ManualENSP_032613.indd 8-9
RD032613
8

ADVERTENCIAS E INSTRUCCIONES DE SEGURIDAD GENERALES

LEA LAS INSTRUCCIONES

ADVERTENCIA: Lea todas las instrucciones antes de operar el inversor. El incumplimiento de todas las instrucciones
enumeradas a continuación puede provocar una descarga eléctrica, un incendio o lesiones graves.

NORmAS DE SEgURIDAD / DEfINICIONES

PELIGRO: Indica una situación de peligro inminente que, si no se evita, provocará la muerte o lesiones graves.
ADVERTENCIA: Indica una situación de peligro inminente que, si no se evita, provocará la muerte o lesiones graves.
PRECAUCIÓN: Indica una situación de peligro potencial que, si no se evita, puede provocar lesiones leves o moderadas.
PRECAUCIÓN: Utilizado sin el símbolo de alerta de seguridad indica una situación de peligro potencial que, si no se evita, puede
provocar daños a la propiedad.
RIESGO DE OPERACIÓN INSEGURA. Cuando se utilizan herramientas o equipos, siempre se deben respetar las precauciones
de seguridad para reducir el riesgo de lesiones personales. La operación, el mantenimiento o la modificación incorrectos de
herramientas o equipos pueden provocar lesiones graves y daños a la propiedad. Las herramientas y los equipos están diseñados
para determinados usos. Fabricante recomienda encarecidamente que NO se modifique este producto y que NO se utilice para
ningún otro uso que aquél para el que fue diseñado. Lea y comprenda todas las instrucciones operativas y las advertencias antes de
utilizar cualquier herramienta o equipo.

INSTRUCCIONES ImpORTANTES DE SEgURIDAD

• Evite las condiciones ambientales peligrosas. No utilice artefactos en zonas húmedas o mojadas. No utilice artefactos bajo
la lluvia.
• Mantenga a los niños ausentes. Guarde lejos de niños. ¡Esto no es un juguete!
• Guarde los artefactos que no utilice en el interior. Cuando no los utilice, los artefactos deben guardarse en el interior en un
lugar seco, alto o bajo llave, lejos del alcance de los niños.
• Desconecte los aparatos. Desconecte el aparato de la fuente de energía cuando no lo utiliza.
• El enfriamiento correcto es fundamental al operar el inversor. No coloque la unidad cerca de los orificios de ventilación del
vehículo ni la exponga a la luz solar directa.
• Uso de suplementos y accesorios. El uso de accesorios o dispositivos no recomendados para este aparato puede resultar
peligroso.
• Manténgase alerta. Use el sentido común. No haga funcionar el inversor cuando está cansado.
• Verifique que no haya piezas dañadas. Cualquier parte que esté dañada debe ser reemplazado por el fabricante antes de su
uso posterior. Contacto con el fabricante en (877) 571-2391 para más información.
• No opere herramientas eléctricas portátiles cerca de líquidos inflamables o en atmósferas gaseosas o explosivas. Los motores de
estas herramientas normalmente chispean, y las chispas pueden encender los vapores.
INSTRUCCIONES DE SEgURIDAD ESpECífICAS pARA LOS INvERSORES
ADVERTENCIA: PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA:
• No conecte al cableado de distribución de CA.
• No realice conexiones o desconexiones eléctricas en áreas designadas como PROTEGIDAS CONTRA IGNICIÓN. Esta unidad NO está
aprobada para áreas protegidas contra ignición.
• Nunca sumerja la unidad en el agua ni en ningún otro líquido, ni la utilice cuando esté húmeda.
• No inserte los objetos extranjeros en los enchufes del inversor.
ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIO:
• No opere cerca de materiales, vapores o gases inflamables.
• No lo exponga al calor extremo o a las llamas.
• Si el fusible del enchufe accesorio del vehículo se abre (los soplos) al tapar en este inversor, no utilice este inversor con este
enchufe accesorio del vehículo:
• No substituya en varias ocasiones el fusible.
• No substituya el fusible del enchufe accesorio del vehículo por uno de un grado más alto del amperaje.
• Nunca intente remendar el fusible con la hoja o el alambre de lata.
• Ninguno de estos acciones pueden causar daño eléctrico serio y/o un fuego.
• Este inversor se clasifica para extraer 10 amperios de un enchufe del vehículo 13.8V. Asegúrese de que el sistema de motor
en su vehículo pueda suministrar suficiente energía al inversor sin hacer al vehículo el fusible accesorio del enchufe abrirse. El
fusible debe ser clasificado más arriba de 12 amperios de la información sobre los grados accesorios del fusible del vehículo se
encuentran típicamente en el manual del operador del vehículo.
9
5/23/2013 1:09:23 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido