Cleaning And Care; Troubleshooting - Klarstein Iceblock Ecosmart 7 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
36

CLEANING AND CARE

• Switch off the appliance before cleaning and unplug the appliance from the wall
outlet.
• Do not use gasoline or other chemicals to clean the product.
• Do not wash the appliance directly.
• If the unit is damaged, contact customer service.
Cleaning the Air Filter
• The air filter can be blocked by dust/protection and should be cleaned once every
two weeks.
• Open the ventilation grille and remove the air filter.
• Clean the air filter with a neutral detergent and lukewarm water. Then dry the filter
in the shade.
• Replace the air filter and all other components.
Cleaning the unit surface
Clean the unit surface with a neutral detergent and a damp cloth. Then rub the device
surface dry with a dry cloth.

TROUBLESHOOTING

Problem
The unit does not start
when the On/Off button is
pressed.
Possible cause
The water level indicator
light flashes because the
water tank is full.
The room temperature
is higher than the set
temperature (electric
heating mode).
The room temperature
is lower than the set
temperature (cooling
mode).
Suggested solution
Empty the water from the
water tank.
Reset the temperature
setting.
Reset the temperature
setting.

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Iceblock ecosmart 91003465610034658

Tabla de contenido