Cleaning And Care - Klarstein ICEWIND MAX Manual De Instrucciones

EN
32

CLEANING AND CARE

Storage
Empty the water from the water tank if you will not be using the device for a long
period of time. Then let the unit run in "General" mode for a while to dry the wet
curtain completely. Then cover the unit or store it in its original packaging.
Cleaning
If you have already been using the appliance for a long period of time, the water
tank, the water tank filter, the wet curtain or the wet curtain filter may become
blocked by dust, limescale or other residues. This can negatively affect the air
volume or the cooling effect. It is recommended to clean the appliance at least
once every 2 weeks. Before cleaning, the mains plug must be disconnected from
the socket.
1. First remove the wet curtain from its holder. To do this, pull the clips on both
sides of the wet curtain holder slightly outwards. The wet curtain and its filter
can then be removed. Clean the wet curtain with clean water and then dry it
completely before putting it back in place (see figure 1).
2. To remove the filter, first pull out the water tank. You can then pull out the
filter (see figure 2).
3. Clean the filter with a soft brush or cloth. Then rinse the filter with clean water.
Bracket position
1
Wet filter cloth
Wet filter cloth
Brackets
Evaporation filter
Grid